GF type 2536 Rotor-X paddle wheel sensor standard paddle wheel assembly


measuring range: 0.1 to 6 m / s, 0.3 to 20 ft / s
open collector output to be installed in tube: DN15 to DN900, 0.5 to 36 inch
max. working pressure: PP 12.5 bar
@ 20 ° C, 180 psi @ 68 ° F PVDF 14 bar @ 20 ° C, 200 psi @ 68 ° F rotor:
PVDF Compatible with: 8550, 8900, 9900, 9900-1BC power supply: <_20mA to = "to" li = "li" vdc = "vdc" _3.3 = "_ 3.3" _24 = "_ 24"> *
only Signet installation fittings PVC 2536 version
DN15-DN100 (½ "- 4") for concentrated sodium hypochlorite 12.5% ​​dosing application in water treatment 7.6 m (25 ft) cable for standard of Wet-Tap sensors
Easy to replace rotor
Can be installed in tube diameters DN15 to DN900 (½ to 36 inch) Range of 0.1 to 6 m / s (0.3 to 20 ft / s)
Wide turndown ratio of 66: 1
High resolution and noise immunity
Open-collector output
Chemically resistant materials

 

Description

Easy to install with reliable reliability, Model 515 Rotor-X log wheel flow sensors are highly repeatable, robust sensors that offer exceptional value with little or no maintenance. The output signal of the Model 515 is a sinusoidal frequency with which a self-current flow meter (Model 5090) can be driven. The wide dynamic current range from 0.3 to 6 m / s (1 to 20 ft / s) allows the sensor to measure liquid flow rates in full tubes and can be used in low-pressure systems. The Model 515 sensors are offered in different materials for a wide range of pipe diameters and insert configurations. The many material choices, including PP and PVDF, make this model extremely versatile and chemically compatible with many liquid process solutions. Sensors can be installed in tubes of up to DN900 (36 in.) Using Signets extensive range of custom fittings. These customized fittings, including T-pieces, saddles and weldolets, set the sensor to the correct insertion depth in the process flow. The sensors are also offered in configurations for wet tap and intrinsically safe installation requirements.

Standards:
CE
China RoHS
RoHS conform
FCC
NSF (3-2536-PX version only)

Application areas:
Chemical production
Liquid Delivery
Systems Pump
Protection
Filtration Systems
pure water production
Not suitable for gases Scrubber Systems
Water Monitoring

Specifications

Principle
House
meetelement
Process Connection
uitgang
Nominal diameter
Brand Georg Fischer
materiaal
Manometer diameter
glycerine
Hygienic
Ask a quotation for this product

Related Products

You may also be interested in the following products:

IRU-420 Atex Isolating repeater

IRU-420 Atex Isolating repeater

PDU Programmable display unit

PDU Programmable display unit

LDU-401 LOCAL PROCESS INDICATOR

LDU-401 LOCAL PROCESS INDICATOR

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl