EBMBTG2S 2/2-way Solenoid Valve servo assisted


Brass

Servo assisted piston seat valve for neutral gasous and liquid fl uids and with PTFE + FPM sealings also for neutral steamy fl uids.

Description

SPECIFICATION

DESIGN

Servo assisted piston seat valve for neutral gasous and liquid fluids and with PTFE + FPM sealings also for neutral steamy fluids.

OPERATION

2/2-ways. Servo assisted.

Normally closed.

MATERIAL

 

  • Body: Brass
  • Internal parts: Stainless steel, brass, FPM and PTFE
  • Sealing:
    • NBR
    • PTFE

 

CONNECTION

G1 /4 up to G2 (DIN ISO 228 T1)

CABLE CONNECTION

With connector acc. to DIN 43650-A

VOLTAGES

  • 24, 205 V direct current (DC)
  • 24, 110, 230 V, 50-60Hz (AC))

 

POWER CONSUMPTION

 

  • DC =
    • 10 W (solenoid 60)
    • 18 W (solenoid 59)
  • AC =
    • 15 / 10 VA (solenoid 60)
    • 45 / 35 VA (solenoid 59)

 

 

DUTY CYCLE

100%

PROTECTION

IP 65 acc. to DIN EN60529

PRESSURE RANGE

  • 1 - 25 bar, PTFE seat seal
  • 0,5 - 40 bar, NBR seat seal

 

TEMPERATURE RANGE

  • -20°C bis + 90°C (NBR seat seal)
  • -10°C bis +200°C (PTFE seat seal)

 

TEMPERATURE OF THE ENVIRONMENT

-10°C up to +50°C if solenoid mounting position vertical underneath, temperature max. +60 °C

Attention: At standard coils the temperature of the coil could raise up to 155 °C dependent on the operating conditions.

INSTALLATION

Optional; perferably solenoid vertical on top.

 

The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Specifications

Principe
Control Electric
medium Water en andere vloeistoffen, Lucht, gas en damp, Stoom, water, Heet water, stoom, lucht, gas
Material Brass
Nominal diameter 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Process Connection thread G "
Werkingswijze Servo gestuurd
Brand Ebora
Hygienic
Ask a quotation for this product

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl