EBMEMF2S and EBMGMF2S 2/2-way-solenoid valve servo-assisted diaphragm sealing


EBMGMF2S

EBMEMF2S

GG-25

Stainless Steel

Seat valve with diaphragm sealing

 

Description

SPECIFICATION

DESIGN

Seat valve with diaphragm sealing.

OPERATION

2/2-ways. Servo-assisted. Normally closed. When the coil is energized the plunger opens a pilot drilling where the media, which is on top of the diaphragm and keeps it closed, is released. The input pressure lift the diaphragm and opens the valve. When the coil is de-energized the plunger closes the pilot drilling, that pressure is restored on top of the diaphragm, causing the valve to shut. The minimum pressure (0,3 bar) is absolutely necessary as pressure difference between input and output of the valve.

MATERIAL

  • Body:
    • GG-25, Stainless Steel 1.4408 (DN15 - DN25)
    • Stainless Steel 1.4581 (DN32 - DN50)
  • Internal parts: Brass and Stainless steel
  • Sealing: NBR (FKM, EPDM)

 

CONNECTION

Flange DN15 up to DN50, PN 16 drilled

CABLE CONNECTION

AC or DC with connection socket according to DIN 43650

VOLTAGES

  • 24, 110, 205 V (DC) 24,
  • 42, 110, 230 V 50/60Hz (AC)

 

POWER CONSUMPTION

43 = 11 watts, 24/15 VA

DUTY CYCLE

100% PROTECTION IP 65 acc. to DIN 40050 with connection socket according to DIN 43650

PRESSURE RANGE

0,3 - 16 bar

MEDIA

Gases and liquids up to 22 mm2 /s

TEMPERATURE RANGE

-10°C up to +80°C

TEMPERATURE OF THE ENVIRONMENT

max. +35°C

Attention: At standard coils the temperature of the coil could raise up to 155 °C dependent on the operating conditions.

INSTALLATION

As desired, preferable upright solenoid

 

The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Specifications

Principe
Control Electric
medium Water en andere vloeistoffen, Lucht, gas en damp, water, olie, lucht
Material Stainless Steel
Nominal diameter DN15, DN20, DN25, DN32, DN40, DN50
Process Connection DIN flanges
Werkingswijze Servo gestuurd
Brand Ebora
Hygienic
Ask a quotation for this product

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl