EBMEMG2S 2/2-way-solenoid valve servo-assisted diaphragm sealing


EBMEMG2S

EBMEMA(L)(M)(F)2S

Stainless Steel

Seat valve with diaphragm sealing

 

Description

SPECIFICATION

DESIGN

Seat valve with diaphragm sealing

OPERATION

2/2-ways. Servo-assisted. Normally closed. When the coil is energized the plunger opens a pilot drilling where the media, which is on top of the diaphragm and keeps it closed, is released. The input pressure lift the diaphragm and opens the valve. When the coil is de-energized the plunger closes the pilot drilling, that pressure is restored on top of the diaphragm, causing the valve to shut. The minimum pressure (0,5 bar) is absolutely necessary as pressure difference between input and output of the valve.

MATERIAL

 

  • Body: Stainless Steel 1.4408
  • Internal parts: Stainless steel
  • Sealing: NBR ( FKM, EPDM)

 

 

CONNECTION

 

  • B.S.P. threaded connection G1 /4 - G1 (DIN ISO 228 T1)
  • welded connection acc. to DIN 3239
  • welded connection acc. to DIN 11850-2
  • welded connection acc. to ISO 4200 Flanged connection PN16

 

 

CABLE CONNECTION

AC or DC with connection socket according to DIN 43650

VOLTAGES

  • 12, 24, 110, 196 V (DC)
  • 24, 42, 110, 230 V 50Hz (AC)

 

POWER CONSUMPTION

11 watts, 24/15 VA

DUTY CYCLE

100% continuous rating

PROTECTION

IP 65 acc. to DIN 40050 with connection socket according to DIN 43650.

PRESSURE RANGE

See table overleaf

MEDIA

Gases and liquids up to 22 mm2 /s

TEMPERATURE RANGE

-10°C bis +80°C

TEMPERATURE OF THE ENVIRONMENT

max. +35°C

Attention: At standard coils the temperature of the coil could raise up to 155 °C dependent on the operating conditions.

INSTALLATION

As desired, vertical preferred

 

The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice!

Specifications

Principe
Control Electric
medium Water en andere vloeistoffen, Lucht, gas en damp, water, olie, lucht
Material Stainless Steel
Nominal diameter DN10, DN15, DN20, DN25, DN32, DN40, DN50, 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Process Connection thread G ", welding ends
Werkingswijze Servo gestuurd
Brand Ebora
Hygienic
Ask a quotation for this product

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl