Electric actuator plastic J3C S-series J+J

Voltage range: 24-240V AC/DC (50 / 60 Hz)
Protection class: IP67
Break torque: 25 / 38 / 60 / 90 Nm
Operation torque: 20 / 35 / 55 / 85 Nm
ISO-flange: F03/F04/F05/F07, octagon 9 / 11 / 14 / 17 mm
Equipped with emergency override with handwheel
Housing: plastic (Polyamid PA6)


The S-series electric drive consists of the S20, S35, S55 and S85. These electric actuators can for instance be mounted on a ball valve or a butterfly valve for electrical control. The drive operates with a preset working angle of 0 ° - 90 °. Construction according to ISO5211 / DIN3337. Voltage range for these drives is 24-240V AC / DC. To be connected via ISO flanges: F03 / F04 / F05 or F07, octagonal 9/11/14/17 mm. The J3C S series is suitable for temperatures between -20 ° and 70 ° Celsius. Furthermore, these drives are standard equipped with:
  • emergency override with handwheel
  • 2 extra possible 'limit-switches'
  • electronic torque limiter
  • heater
  • LED status light
  • dome position indicator
  • freely adjustable cams (max 340°)
  • standard 2 point-control, 3 point-regulation


  • BSR (Battery safety pack)
    In case of power failure, the actuator turns into a configured safety position (open on closed).
  • DPS (Digital positioning system)
    The position of the actuator is controlled by an input signal and provides its actual position as an output signal.
    Following signals are available: 0-10V, 1-10V, 0-20mA, 4-20mA.
  • 3 position
    The actuator has the possibility to drive to an additional middle position.
    Standard 0°, 90° and -180°
  • Permanet phase wiring
    The actuator has a permanent power connection and automatically turns to a predetermined position. If the second contact is powered, it moves into the opposite position.
  • Potentiometer
    A potentiometer inside of the actuator provides its actual position as an ohmic value. Variations: 1kΩ, 5kΩ, 10kΩ


House Polyamide
Operation torque 20 Nm, 35 Nm, 55 Nm, 85 Nm
ISO-top F03, F04, F05, F07
Breakaway torque 25 Nm, 38 Nm, 60 Nm, 90 Nm
Intake 11 mm, 14 mm, 9 mm
Brand J+J
Voltage range 24 - 240V
Ask a quotation for this product

Related Products

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl