FLS F6.61 MAGMETER FLOW SENSOR


The new FLS F6.61 Hot Tap Insertion Magmeter Flow Sensor is a flowmeter without moving mechanical parts which can be applied for the measurement of dirty liquids so long as they are conductive and homogeneous. The sensor can provide three different options: frequency output to be connected to FLS flow monitors, 4-20 mA output for long distance transmission and PLC connection and the new volume pulse output freely settable. FLS F6.61 Insertion Magmeter is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily set by a PC all parameters according to specific installation requirements. The sensor can be assembled in a wide dynamic range of pressurized pipe sizes from DN50 (2”) to DN900 (36”) using a standard clamp saddle and an isolation ball valve.

Description

MAIN FEATURES

  • Adjustable sensor position
  • Hot-Tap installation
  • Operating parameters settable by PC interface
  • Pressure intake
  • Standard 1 ¼” BSP process connection
  • No moving parts, no wear, maintenance free
  • Flow Rate Range settable from 0.05 to 8 m/s (0.15 to 25 ft/s)
  • Accurate measurement of dirty liquids
  • 4-20 mA, frequency or volume pulse outputs
  • Bi-directional flow measurement selectable

APPLICATIONS

  • Water distribution
  • Leak Detection or Monitoring
  • Raw water intake
  • Water and waste water treatment
  • Ground water remediation
  • Irrigation

TECHNICAL DATA

General

  • Pipe Size Range: DN50 to DN900 (2” to 36”). Special version on request for other sizes.
  • Max Flow Rate Range: from 0.05 to 8 m/s (0.15 to 26.24 ft/s)
  • Full Scale: 8 m/s (26.24 ft/s)
  • Linearity: ± 1% of reading + 1,0 cm/s
  • Repeatability: ± 0.5% of reading
  • Enclosure: IP65
  • Materials:
    - case: PC/ABS
    - gasket: EPDM
  • Wetted Materials:
    - sensor body: 304 SS/PVDF
    - o-rings: EPDM or FPM
    - electrodes: 316LSS

Electrical

  • Power Supply:
    - 12 to 24 VDC ± 10% regulated (reverse polarity and short circuit protected)
    - maximum current: consumption: 250 mA
    - protective earth: < 10 Ω
  • Current output:
    - 4-20 mA, isolated
    - max. loop impedance: 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
    - positive or negative flow indication
  • Solid State Relay output:
    - user selectable as MIN alarm, MAX alarm, Volumetric, Pulse Out, Window alarm, Off
    - optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
    - max pulse/min: 300
  • - hysteresis: User selectable
  • Open Collector output (Frequency):
    - type: Open Collector NPN
    - frequency: 0 – 800 Hz
    - max. pull-up voltage: 24 VDC
    - max. current: 50 mA, current limited
    - compatible with M9.02, M9.50 and M9.07
  • Open Collector output (Direction):
    - type: Open Collector NPN
    - max. Pull-up Voltage: 24 VDC
    - max. Current: 50mA, current limited
    - flow direction:
  • 0 VDC arrow-wise
  • + VDC anti arrow-wise

Enviromental

  • Storage Temperature: -30°C to +80°C (-22°F to 176°F)
  • Ambient Temperature: -20°C to +70°C (-4°F to 158°F)
  • Relative Humidity:0 to 95% (non-condensing)
  • Fluid conditions:
    - homogeneous liquids, pastes or slurries, also with solid content
    - Min Electrical Conductivity: 20 μS
    - Temperature:
  • PVDF bottom version: -10 °C to +60 °C (14 °F to 140 °F)
  • PEEK bottom version: -10 °C +150 °C (14 °F to 302 °F)
  • Max. operating pressure:
    - 16 bar @ 25°C (232 psi @ 77°F)
    - 8.6 bar @ 60°C (124 psi @ 140°F)

Standards & Approvals

  • Manufactured under ISO 9001
  • Manufactured under ISO 14001
  • CE
  • RoHS Compliant
  • GOST R

Specifications

Ask a quotation for this product

Related Products

You may also be interested in the following products:

FLS M9.02  FLOW MONITOR & TRANSMITTER

FLS M9.02 FLOW MONITOR & TRANSMITTER

FLS M9.07 DUAL-PARAMETER CONDUCTIVITY AND FLOW MONITOR & TRANSMITTER

FLS M9.07 DUAL-PARAMETER CONDUCTIVITY AND FLOW MONITOR & TRANSMITTER

FLS M9.50 BATCH CONTROLLER

FLS M9.50 BATCH CONTROLLER

FLS M9.03 DUAL-PARAMETER FLOW MONITOR AND TRANSMITTER

FLS M9.03 DUAL-PARAMETER FLOW MONITOR AND TRANSMITTER

FLS M9.08 DUAL-PARAMETER PH/ORP AND FLOW MONITOR

FLS M9.08 DUAL-PARAMETER PH/ORP AND FLOW MONITOR

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl