FLS M9.02 FLOW MONITOR & TRANSMITTER


The new FLS M9.02 is a powerful flow monitor designed to convert the frequency signal of FLS flow sensors into a flow rate. M9.02 is equipped with a wide full graphic display 4” which shows measured values clearly and a lot of other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every parameters. Calibration can be performed just fixing installation features or using a reference value through a new “in-line calibration”. A 4-20mA output is available to remote flow rate to a external device. A proper combination of digital outputs allows customized setups for any process to be controlled.

Description

MAIN FEATURES

  • Wide full graphic display
  • Multicolor backlight
  • Help on board
  • Installation flexibility
  • Fast, intuitive and mistake-proof calibration software
  • Mechanical relay for external device control
  • Solid State Relays for programmable alarms
  • Multilanguage menu

APPLICATIONS

  • Water treatment systems
  • Industrial waste water treatment and recovery
  • Water distribution
  • Filtration systems
  • Swimming pools & SPA
  • Irrigation & Fertigation
  • Leak detection
  • Cooling water monitoring
  • Processing and manufacturing industry
  • Chemical production

TECHNICAL DATA

General

  • Associated sensors: FLS hall effect flow sensors with frequency output or FLS F6.60 Flow sensor magmeters
  • Materials:
    - Case: ABS
    - Display window: PC
    - Panel & Wall gasket: silicone rubber
    - Keypad: 5-button silicone rubber
  •  Display: - LC full graphic display
    - Backlight version: 3-colours
    - Backlight activation: User adjustable with 5 levels of timing
    - Update rate: 1 second
    - Enclosure: IP65 front
  • Flow input range (frequency): 0÷1500Hz
  • Flow input accuracy (frequency): 0,5%


Electrical

  • Supply Voltage: 12 to 24 VDC ± 10% regulated
  • FLS hall effect flow Sensor power:
    - 5 VDC @ < 20 mA
    - Optically isolated from current loop
    - Short circuit protected
  • 1 x Current output:
    - 4-20 mA, isolated, fully adjustable and reversible
    - Max loop impedance: 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
  • 2 x Solid State Relay output:
    - User selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - Optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
    - Max pulse/min: 300
    - Hysteresis: User selectable
  • 1 x Relay output:
    - User selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - Mechanical SPDT contact - Expected mechanical life (min. operations): 107
    - Expected electrical life (min. operations): 105 N.O./ N.C.switching capacity 5A/240VAC
    - Max pulse/min: 60
    - Hysteresis: User selectable

Environmental

  • Operating temperature: -20 to +70°C (-4 to 158°F)
  • Storage temperature: -30 to +80°C (-22 to 176°F)
  • Relative humidity: 0 to 95% not condensing

Standards & Approvals

  • Manufactured under ISO 9001
  • Manufactured under ISO 14001
  • CE
  • RoHS Compliant
  • GOST R

Specifications

Ask a quotation for this product

You may also be interested in the following products:

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl