FLS M9.07 DUAL-PARAMETER CONDUCTIVITY AND FLOW MONITOR & TRANSMITTER


The new FLS M9.07 is a dual monitor and transmitter which combines conductivity and flow measurements. A 4” wide full graphic display shows measured values clearly together with many other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every parameters. Different type of calibrations can be performed to fit user needs for both measurements. A 4-20mA output dedicated to each measurement grants to remote values to a external device. A proper combination of digital outputs allows customized setups for any process to be controlled.

Description

MAIN FEATURES

  • Wide full graphic display
  • Multicolor backlight
  • Help on board
  • Simultaneous measurement of conductivity, temperature and flow
  • Fast, intuitive and mistake-proof calibration software
  • Mechanical relay for external device control
  • Solid State Relays for programmable alarms
  • Multilanguage menus

APPLICATIONS

  • Water treatment and regeneration
  • Industrial waste water treatment and recovery
  • Softener process
  • Filtration systems
  • Desalination process
  • Demineralized water production
  • Reverse osmosis process
  • Cooling water monitoring
  • Processing and manufacturing industry
  • Chemical production

TECHNICAL DATA

General

  • Associated sensors: FLS conductivity/temperature sensors & FLS hall effect flow sensors or FLS F6.60 Flow sensor magmeters
  • Materials:
    - case: ABS
    - display window: PC
    - panel & wall gasket: silicone rubber
    - keypad: 5-button silicone rubber
  • Display:
    - LC full graphic disply
    - backlight version: 3-colours
    - backlight activation: User adjustable with 5 levels of timing
    - update rate: 1 second
    - enclosure: IP65 front
  • Conductivity input range: 0,055÷200000μS
  • Conductivity measurement accuracy: ± 2.0 % of reading value
  • Temperature input range: -50÷150°C (-58÷302°F)(with Pt100-Pt1000)
  • Temperature measurement resolution: 0,1°C/°F (Pt1000); 0,5°C/°F (Pt100)
  • Flow input range (frequency): 0÷1500Hz
  • Flow input accuracy (frequency): 0,5%Electrical
  • Supply Voltage: 12 to 24 VDC ± 10% regulated
  • FLS hall effect flow Sensor power:
    - 5 VDC @ < 20 mA
    - optically isolated from current loop
    - short circuit protected
  • 2 x Current output:
    - 4-20 mA, isolated, fully adjustable and reversible
    - max loop impedance: 800 Ω @ 24 VDC - 250 Ω @ 12 VDC
  • 2 x Solid State Relay output:
    - (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - (Conductivity) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
    - optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
    - max pulse/min: 300
    - hysteresis: user selectable
  • 2 x Relay output:
    - (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - (Conductivity) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
    - mechanical SPDT contact
    - expected mechanical life (min. operations): 107
    - expected electrical life (min. operations): 105 N.O./N.C.switching capacity 5A/240VAC
    - max pulse/min: 60
    - hysteresis: user selectable

Environmental

 

  • Operating temperature: -20 to +70°C (-4 to 158°F)
  • Storage temperature: -30 to +80°C (-22 to 176°F)
  • Relative humidity: 0 to 95% not condensing

Standards & Approvals

  • Manufactured under ISO 9001
  • Manufactured under ISO 14001
  • CE
  • RoHS Compliant
  • GOST R

 

Specifications

Ask a quotation for this product

You may also be interested in the following products:

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl