FLS M9.08 DUAL-PARAMETER PH/ORP AND FLOW MONITOR


The new FLS M9.08 is a dual monitor which combines pH/ORP and flow measurements. A wide full graphic display 4” shows measured values clearly and a lot of other useful information. Moreover, due to a multicolor display plus a powerful backlight, measurement status can be determined easily from afar also. A tutorial software guarantees a mistake-proof and fast set up of every settings. Different type of calibrations can be performed to fit user needs for both measurements. A 4-20mA output dedicated to each measurement grants to remote values to a external device. A proper combination of digital outputs allows customized setups for any process to be controlled.

Description

MAIN FEATURES

  • Wide graphic display
  • Multicolor backlight visualization
  • Help on board
  • Simultaneous measurement of pH/ORP and flow
  • Intuitive calibration procedures
  • Mechanical relay for external device control
  • Solid State Relays for programmable alarms
  • Multilanguages menù

APPLICATIONS

  • Water treatment and regeneration
  • Industrial waste water treatment and recovery
  • Scrubber control
  • Neutralization systems
  • Heavy metals recovery
  • Metal surface coating
  • Processing and manufacturing industry
  • Chemical production
  • Swimming pools and SPA

TECHNICAL DATA

General

  • Associated sensors: FLS pH/ORP sensors & FLS hall effect flow sensors with frequency output or FLS F6.60 family sensors
  •  Materials:
    - case: ABS
    - display window: PC
    - panel & Wall gasket: silicone rubber
    - keypad: 5-button silicone rubber
  • Display:
    - backlight version: 3-colours
    - backlight activation: User adjustable with 5 levels of timing
    - update rate: 1 second
    - enclosure: IP65 front
  • pH input range: -2÷16pH
  • pH measurement resolution: ± 0.01 pH
  • ORP input range: -2000÷ +2000mV
  • ORP measurement resolution: ± 1 mV
  • Temperature input range: -50÷150°C (-58÷302°F)(with Pt100-Pt1000)
  • Temperature measurement resolution: 0,1°C/°F (Pt1000); 0,5°C/°F (Pt100)
  • Flow input range (frequency): 0÷1500Hz
  • Flow input accuracy (frequency): 0,5%Electrical
  • Supply Voltage: 12 to 24 VDC ± 10% regulated
  • FLS hall effect flow Sensor power:
    - 5 VDC @ < 20 mA
    - optically isolated from current loop
    - short circuit protected
  • 2 x Current output:
    - 4-20 mA, isolated, fully adjustable and reversible
    - max loop impedance: 1000 Ω @ 24 VDC
  • 2 x Solid State Relay output:
    - (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - (pH/ORP) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
    - optically isolated, 50 mA MAX sink, 24 VDC MAX pull-up voltage
    - max pulse/min: 300
    - hysteresis: User selectable
  • 2 x Relay output:
    - (Flow) user selectable as MIN alarm, MAX alarm, Pulse Out, Window alarm, Off
    - (pH/ORP) user selectable as ON-OFF, Proportional frequency output, Timed Pulse, Off
    - mechanical SPDT contact
    - expected mechanical life (min. operations): 107
    - expected electrical life (min. operations): 105 N.O./N.C.switching capacity 5A/240VAC
    - max pulse/min: 60
    - hysteresis: user selectable

Environmental

  • Operating temperature: -20 to +70°C (-4 to 158°F)
  • Storage temperature: -30 to +80°C (-22 to 176°F)
  • Relative humidity: 0 to 95% not condensing

Standards & Approvals

  • Manufactured under ISO 9001
  • Manufactured under ISO 14001
  • CE
  • RoHS Compliant
  • GOST R

Specifications

Ask a quotation for this product

You may also be interested in the following products:

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS F3.00 PADDLEWHEEL FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS ULF ULTRA LOW FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.10 PADDLEWHEEL MINI FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F3.80 OVAL GEAR FLOW SENSOR

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

FLS F111 INSERTION FLOW SENSORS HOT TAPPADDLEWHEEL & TURBINE FLOW SENSORS

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl