FLS pH/ORP 600 PVCC BODY FLAT SURFACE ELECTRODE


This is the rugged version of the traditional flat electrodes with an improved self-cleaning effect. Installation and maintenance are easy due to the quick disconnect BNC connectors. Built into the electrode’s body is a sealed, gel-filled double junction reference design. This design provides an extra barrier against reference side contamination and allows the electrodes to be used in severe applications prolonging electrode life. The pH-responsive flat glass surface is placed in the center of the measuring surface and surrounded by the flat porous plastic reference junction providing an excellent sample contact. A wide range of installation accessories allows in line, submersion or hot tap installation.

Description

MAIN FEATURES

  • pH and ORP versions
  • Flat electrodes
  • Double junction technology
  • Large gel reference volume
  • High protection from process contamination
  • Easy and quick installation system
  • BNC connector
  • In line, submersion or hot tap installation
  • Low cost fittings
  • HF option (pH) for liquids with HF (max. 2%) inside
  • DI option (pH) on request for pure water (<100uS)
  • DA option for presence of stray currents or for long distance due to signal amplification


APPLICATIONS

  • Water & Wastewater treatment
  • Pre-chlorination & de-chlorination
  • Neutralization systems
  • Water quality monitoring
  • Ozone treatment
  • Coolingtowers
  • Boiler systems
  • Bleach production
  • Pulp bleaching
  • Aquaculture
  • Fruit and vegetables washing
  • Textile Dye Process

TECHNICAL DATA

General

  • Operating Range:
    - pH Electrodes: 0 - 14 pH (0 - 12.3 pH without Na+ error)
    - ORP Electrodes: ± 2000 mV
  • Pipe Size Range: DN15 to DN100 (0.5” to 4”)
  • Zero voltage point new electrode performances: 7.00pH ± 0.2pH
  • Efficiency new electrode performances: > 97% @ 25°C (77°F)
  • Response time new electrode performances:
    - pH: < 6 sec for 95% of signal change
    - ORP: application dependent
  • Reference
    - type: sealed double junction
    - electrolyte: Solidified Gel 3.5M KCl 0.1M KCl for LC electrode version / solidified gel KCl 3.5M
    - secondary junction: Nylon filament
    - wire: Ag/AgCl.
  • Process Connection:
    - In-line installation: threaded nipple ½”, ¾” FLS installation fittings
    - submersible installation
    - hot-tap installation
  • Max Working pressure/ working temperature:
    - 6,7bar@75°C (100psi@170°F)
    - 5,7bar@81°C (85psi@180°F)
  • Wetted materials:
    - body: C-PVC (PVDF only on request)
    - reference Junction: porous HDPE
    - sensing surface: glass membrane (pH),platinum sealed in glass (ORP)
  • O-ring: FPM (Viton)

Standards & Approvals

  • Manufactured under ISO 9001
  • Manufactured under ISO 14001
  • CE
  • GOST R

Specifications

Ask a quotation for this product

Related Products

You may also be interested in the following products:

FLS M9.06 PH/ORP MONITOR & TRANSMITTER

FLS M9.06 PH/ORP MONITOR & TRANSMITTER

Installatie fittingen ChemX3

Installatie fittingen ChemX3

FLS M9.08 DUAL-PARAMETER PH/ORP AND FLOW MONITOR

FLS M9.08 DUAL-PARAMETER PH/ORP AND FLOW MONITOR

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl