FT44 Ball Float Steam Traps (DN15 to DN100)


The FT44 is a carbon steel bodied ball float steam trap having stainless steel working internals and automatic air venting facility. The body and cover castings are produced by a TÜV approved foundry. The trap is supplied with integrally flanged connections and can be maintained without disturbing the pipework. Vertical flanged connections, designated FT44V, are available for all sizes.

Description

DN15 - DN50

Flow direction for the horizontal trap is clearly illustrated above. For vertically orientated traps the flow is downwards only.

Beschikbare uitvoeringen
FT44 – horizontale aansluitingen
FT44V – verticale aansluitingen
Capsule (ontluchter)
De BP99/32 capsule gebruikt in de FT44 is geschikt tot een oververhitting van 150°C bij 0 bar eff. en en een oververhitting van 50°C bij 32 bar eff.
Beschikbare opties*
Op de FT44 met horizontale aansluitingen kan een bijkomende naaldafsluiter (SLR) voorzien worden voor het gebruik als anti-stoomstopsysteem (FT44-C)
De bovenkant van het deksel kan voorzien worden van een 3/8” BSP of NPT tapgat voor montage van een evenwichtsleiding.
De bodem van het deksel kan voorzien worden van een 3/8” BSP of NPT tapgat voor montage van een aftapkraan.
* Gelieve duidelijk te specifieren bij bestelling.
Standaarden:
Het product is volledig in overeenstemming met de europese richtlijn voor drukapparatuur 97/23/EC (PED).
Certificaten:
Op aanvraag is het product beschikbaar met certificaat Type Test Rapport en materiaalcertificaat EN 10204 3.1.
Gelieve duidelijk te specifieren bij bestelling.

Available options:

  • FT44 – Horizontal flow 
  • FT44V – Vertical flow

Capsule
The BP99/32 capsule which is used in the FT44 is suitable for use on 150°C superheat @ 0 bar g and 50°C superheat @ 32 bar g.

Optional extras
A manually adjustable needle valve (designated 'C' on the nomenclature i.e. FT44-C) can be fitted to the FT44 horizontal version only.

This option provides a steam lock release (SLR) feature in addition to the standard air vent. For further information please consult

Spirax Sarco.

The top of the cover can be drilled and tapped " BSP or NPT for the purpose of fitting a balance line if requested at the point of order.

The bottom of the cover can be drilled and tapped " BSP or NPT for the purpose of fitting a drain cock if requested at the point of order.

Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark when so required.

Certification
This product is available with certification to EN 10204 3.1. Note: All certification / inspection requirements must be stated at the time of order placement.

Sizes and pipe connections
DN15, DN20, DN25, DN40 and DN50.

Horizontal traps: Note the flow direction when facing the body: - DN15 to DN25 is left to right. - DN40 and DN50 is right to left.
Standard flanges are EN 1092 PN40 with face-to-face dimensions in accordance with EN 26554 (Series 1), ASME B 16.5 Class 150, ASME B 16.5 Class 300 and JIS /KS 20 flanges are also available with extended face-to-face dimensions.

Vertical traps: Note that the flow direction is vertically downwards only.
Standard flanges are EN 1092 PN40 with face-to-face dimensions in accordance with EN 26554 (Series 1). ASME B 16.5 Class 150, ASME B 16.5 Class 300 and JIS / KS 20 are also available with face-to-face dimensions in accordance with EN 26554 (Series 1).ASME / JIS / KS flanges are supplied with tapped holes to receive flange bolts. ASME flanges have UNC threads and JIS / KS have metric threads.

How to order

Example: 1 off Spirax Sarco DN25 FT44-14 ball float steam trap, flanged to EN 1092 PN40 with carbon steel body and cover and thermostatic air vent.

 

DN80 - DN100

The FT44 is a carbon steel ball float steam trap with integral automatic air venting facility. It is available with horizontal flanged connections only. If required the covers can be drilled and tapped 2" BSP or NPT for the purpose of fitting drain cocks.

Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC and carries the mark when so required.

Certification
This product is available with certification to EN 10204 3.1.
Note: All certification /inspection requirements must be specified at the time of order placement.

Sizes and pipe connections
DN80 and DN100 standard flange is EN 1092 PN40, EN 1759-1 or ASME (ANSI) Class 150 or 300, and JIS /KS 20K.

 

Specifications

Principe Gesloten vlottercondenspot
Control
medium
Material Steel, Cast steel
Nominal diameter DN15, DN20, DN25, DN32, DN40, DN50, DN80, DN100
Process Connection ANSI flanges, DIN flanges
Werkingswijze
Brand Spirax Sarco
Hygienic Non hygienic
Ask a quotation for this product

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl