P1538-P1010-P1011 Pressure gauges with Combined Unit System acc. to DIN 38030

Accuracy class 1.0 and 1.6

Nominal size: ND 60, 80 and 100



  • stainless steel case,
  • protection class IP 43,
  • accuracy class 1.0 and 1.6
  • for use up to full scale value,
  • 1.3 x overload range,
  • measurement system of high quality copper alloy

Measuring ranges

  • 0 ... 6 bar,
  • 0 ... 10 bar,
  • 0 ... 12bar,
  • 0 ... 16 bar


  • Railway vehicles with air pressure brakes,
  • trucks and buses with air pressure brakes


Model: 1538, 1010, 1011



The pressure gauges built with combined unit system (consisting of measurement system, movement and dial) are especially designed for applications with highest demands on pressure measurement like vehicles with pneumatic brakes.
They have been developed especially for railway vehicles; but they are also suitable for buses or trucks. Using stainless steel for the housing leads to a good resistance against environmental influences.
The measurement system made of a special copper alloy ensures a very good long term stability even at high load cicle conditions.

In all versions the dials are illuminated gla re-free by a special light conductor.
The illumination of the dial is made either indirectly via slots in the housing or directly via bulb or LED in socket BA9s.
For special applications illuminating foils, stimulated by a converter, are used.
The special design of measuring system, dial and movement as a combined unit system ensures ease of installation in any application.


Principle Pressure gauge
Process Connection
Nominal diameter
Brand Tecsis
Manometer diameter
Hygienic Non hygienic
Ask a quotation for this product

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl