P1580 Heavy Duty pressure gauges with diaphragm system

Nominal sizes ND 60 and ND 80

Connection position bottom, radial or back, central


  • High reliability and long service life due to modular construction system
  • Insensitive to pressure pulses and mechanical vibrations
  • High level of shock resistance
  • Complies with safety requirements of EN 837-3
  • Overload capacity, 1.3x
  • Protection IP 54
  • Stainless steel casing

Measuring ranges

  • 0 ... 1 bar to 0 ... 40 bar


  • Compressors, turbo chargers, hydraulics,
  • pumps, automotive engineering and
  • general mechanical engineering

Models: P1571, P1580, P1582


The Heavy Duty pressure gauges with diaphragm system are particularly suitable for measuring jobs where strong mechanical vibrations or pressure pulsed may arise. They comply with the accident prevention regulation on compressors (VBG 16) and thus fulfil the safety requirements of EN 837-3.

The annular fitted measuring element (diaphragm) is considerably less sensitive to pressure pulsed, vibrations and shock than other measuring elements. Furthermore, diaphragm systems have a relatively large actuating force to activate the pressure display even at low pressures.

The gauges are designed and manufactured on the basis of a modular construction system, associated with increased reliability and extended service life.

Heavy Duty pressure gauges with diaphragm systems are thus products which are designed especially for use in harsh conditions.


Principle Pressure gauge
Process Connection thread G "
Nominal diameter 1/4", 1/2"
House Stainless steel
meetelement Koper
uitgang Visueel
Scale range -1..15 bar, 0..10 bar, 0..25 bar
Manometer diameter 80 mm
aansluitpositie onder (6 uur)
glycerine niet gevuld
Brand Tecsis
Ask a quotation for this product

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl