PDU Programmable display unit


  • For measurement and display of physical values
  • Current or voltage input (e.g. from CLM, ULM, HLM level meters)
  • Up to 4 relay-outputs with direct function
  • Front panel performance or wall-mounted case
  • Isolated analog output 4 ... 20 mA (option)
  • Power supply voltage 230 V or 24 V

The programmable display unit PDU measures and displays wide range of physical values (level, pressure, flow, temperature, etc.). It is designed as a panelmeter, so its montage is provided onto a front panel cutout or as wall-mounted case. Terminal blocks are on rear side in panelmeter and inside in wall-mounted case. At the front panel there are four buttons for setting up all functions and LEDs for indication of limits (max. four) and LED for alarm. The device operates in the following modes: linear, square, root and user defi ned (max. 20 points). All settings are saved in EEPROM memory.

 

Description

Features of variants

  • PDU–420–W A 2 relay outputs, wall-mounted case. Power supply voltage 230 V or 24 V, communication interface RS–485 / Modbus RTU, support IR remote control RCW–1.
  • PDU–420–P B 2 relay outputs, front panel performance. Power supply voltage 230 V or 24 V, communication interface RS–485 / Modbus RTU.
  • PDU–421–P B 2 relay outputs, front panel performance. Power supply voltage 230 V or 24 V, communication interface RS–485 / Modbus RTU, support isolated analog output signal 4 ... 20 mA.
  • PDU–440–P B 4 relay outputs, front panel performance. Power supply voltage 230 V or 24 V, communication interface RS–485 / Modbus RTU.
  • RCW–1 C Infrared remote control for settings parameters of unit without opening the tight case. Only for PDU–420–W unit. For detailed information see “Accessories” datasheet.

Electrical connection

The unit is not equipped with an internal fuse or power supply circuit breaker. Because of this an external time-delay cut-out fuse with a small nominal current value must be used (recommended bipolar, max. 2A) and a power supply circuitbreaker located near the unit. In the case of using a monopolar fuse it must be mounted on the phase cable (L).
The power supply network cable diameter must be selected in such a way that in the case of a short circuit of the cable from the side of the unit the cable shall be protected against destruction with an electrical installation fuse.

 

Correct specifications example

PDU–420–W–230V  (420) 2 relay output; (W) Wall-mounted case; (230V) Supply voltage range 230 V AC ± 10%.
PDU–421–P–230V   (421) 2 relay output; (P) Front panel performance; (230V) Supply voltage range 85 ... 260 V AC/DC.
PDU–440–P–24V     (440) 4 relay output; (P) Front panel performance; (24V) Supply voltage range 19 ... 50 V DC (16 ... 35 V AC).

 

Accessories

Standard (included in the unit price)
• 2 pcs of panel thickness mounting brackets (only for PDU–4xx–P)
Optional (for extra charge)
• Infrared remote control RCW–1 (only for PDU–420–W)
• Additional frame for IP65 protection class (only for PDU–4xx–P)

 

Safety, protection and compatibility

Electrical equipment of protection group II. Connection to mains only through fuse or overcurrent circuit breaker (Max. 2 A).
Electrical safety according to EN 61010.EMC according to EN 61326.

Specifications

principe
House
meetelement
Process Connection
uitgang Visueel, 4..20 mA, 0..10 V, 0..5 V, Contacten
Nominal diameter
Brand Dinel
materiaal
Manometer diameter
glycerine
Hygienic Non hygienic
Ask a quotation for this product

Related Products

You may also be interested in the following products:

CLM-36 Capacitive level meters

CLM-36 Capacitive level meters

HLM en HLMS Hydrostatic level meters

HLM en HLMS Hydrostatic level meters

PZM/VRM 050 Druksensor

PZM/VRM 050 Druksensor

KERAMESS 100/101 Druksensor

KERAMESS 100/101 Druksensor

ULM-53 Ultrasonic level meters

ULM-53 Ultrasonic level meters

© 2012-2018 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl