S1100 /S1200 Electronical pressure switch MagSwitch

One ore two adjustable switching outputs
One adjustable switching output
with adjustable hysteresis



  • non-contact measurement
  • long-life cycle
  • very good repeatability
  • one or two switching outputs
  • simple adjustment of the set points
  • status LED-indication
  • compact design
  • pressure connection in brass
  • p- or n-switching

Measuring ranges

  • positive adjustment ranges from 0.005 up to 600bar
  • vacuum ranges up to -900mbar


  • mechanical engineering
  • vacuum technology
  • refrigeration technology
  • filter monitoring
  • level measurement
  • building technology


Model: S1100, S1200


The compact electronic pressure switch MagSwitch provides pressure monitoring. Adjusting screws are used to set the switching point whilst under pressure. Integrated LEDs indicate the current switching state. The principle of non-impact measurement based on the Hall-effect produces a pressure switch which has a high level of repeatability and durability, even in the case of a high number pressure cycles.

The contact functions (normally open / normally closed) and the contact types (p-switching / n-switching) are available as optional extras. Switching currents ranging from a few Micro-Amps to 100mA allow the MagSwitch to be easily integrated into almost any control system. The adjustable hysteresis enables to build up 2-position controllers easily without any additional external components.

A pressure connection free of elastomers qualifies the MagSwitch for many liquid and gaseous media. The metal diaphragm can also be used without any problem for simultaneously occurring pressure and vacuum.


principe Drukschakelaar
Process Connection
Nominal diameter
uitgang Contacten
Scale range
Manometer diameter
Brand Tecsis
Ask a quotation for this product

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands - info@ebora.nl