SC400 / SC410 / SC420 Electronic pressure switch with a four digit LED display

SC400 - with two switching outputs
SC410 - with one switching output and an analogue output (4…20mA oder 0…10V)
SC420 - with two switching outputs and an analogue output (4…20mA)


  • Adjustment ranges from -1 up to 700 bar
  • Sensing element ceramic or thin-film
  • Repeatability 0.2 %
  • Switching points, reset points and switching function (NO/NC) and switching output (pnp/npn) configurable
  • Configurable analogue output
  • Integrated password protection
  • Attenuation of the output signals, up to 2000 ms (option)
  • Delay of the switching outputs, up to 99.9 s (option)
  • Min/Max-memory (option)


  • Hydraulic power unit
  • Mechanical engineering
  • Vacuum technology
  • Filter monitoring

Model: S2400, S2410, S2420


The pressure switches SC400/SC410/SC420 with display provides continuous pressure monitoring and allows the configuration of the set points without pressurising. It is easy to configure the switching point and reset point without pressurising, or to configure the type of contact (NO/NC), damping, delay and n-/p-switching. In addition, authorised personnel can quickly and easily access the user menu to alter the switching points. In series S2410 and S2420 the analogue signal can be scaled from 20% of the span up. Switching currents from a few μA up to 500mA can be switched by the output transistors.

By the use of time tested ceramic or thin film sensors, this pressure switch features a high level of repeatability and durability, even in the case of a high number of pressure cycles. The turnable display and optional the turnable process connection allows the usage of this pressure switch even under difficult installation conditions.

The high-quality stainless steel housing qualifies the SC400/SC410/SC420 also for the usage under adverse conditions. For the higher pressure ranges all wetted parts are made of stainless steel, therefore working with almost every media. The SC400/SC410/SC420 are multifunctional applicable for measurement tasks within hydraulic and pneumatic applications.


Principle Pressure sensor, Pressure switch
Process Connection thread G ", thread NPT
Nominal diameter 1/4"
House Stainless steel
meetelement Roestvaststaal
uitgang Visueel, 4..20 mA, 0..10 V, Contacten
Scale range -1..15 bar, 0..10 bar, 0..25 bar, 0..40 bar, 0..600 bar
Manometer diameter
Brand Tecsis
Ask a quotation for this product

© 2012-2019 Ebora Process Automation is a trademark of Ebora BV - 't Veld 3 - S, Heteren, Netherlands -